SPV Cells

Technical Characteristics

• Base material : Mono/ Poly crystalline CZ silicon wafer (p-type )
• Junction : Phosphorous diffused (n-on-p)
• Size
• Side to side: 125 ± 1 mm
• Corner to corner: 165 ± 1 mm / 150 ± 1 mm
• Thickness : 200 ± 25 microns
• Shape: Pseudo Square
• Surface: Textured
• Metallization
• Front: Screen printed Silver, Silicon Nitride coated.
• Back: Screen printed Silver-Aluminium bus bar pads / Aluminum (BSF)

Note:The values referred above are at STC 1000 W/ sq. m Solar Irradiance, 25 deg C Cell

               Temperature and Air Mass 1.5.

SPV Modules

Technical Characteristics

• Configuration : Single glass laminated with 36 or 72 Solar PV Cells in series
• Module Frame Material : Anodized Aluminum
• Glass : High Transmission toughened glass
• Lamination : EVA-Cell-EVA-Tedlar
• Junction Box : Weather-resistant with option of snap-on-connectors

Note: The values referred above are at STC 1000 W/ sq. m Solar Irradiance, 25 deg C Module temperature and Air Mass 1.5.